A liquid crystal panel section of the module (LCM): panel process can be divided into three stages, first semiconductor processes preceding (array), that is, the transistor is a thin film layer on the glass substrate made, compared with the middle of the liquid crystal filling assembly process (cell), that is, the color filter layer of glass and glass film transistors, together, poured into a liquid crystal intermediate.
2014年4月2日星期三
Tsingtek lcd display one each side of the screen , on the back of the display has a backlight
LED display and LCD display is actually its the same, are the LCD is also no difference. The main difference is that makes the screen backlight to produce different light sources .
Ordinary LCD CCFL light source is used , that is, the cold cathode fluorescent tube ( look similar to the copy in the scanning lamp ) , one each side of the screen , on the back of the Graphic LCD Module display has a backlight , the fluorescent material composition, You can make light evenly distributed on both sides of the entire back of the screen , so that the whole screen evenly lit. However, because of technical limitations , such as the display brightness is not completely uniform , but it is difficult to find , but also a certain lamp life , a long time will be yellow .
LED LCD screen using a LED light source , which is the light-emitting diode ( just like on the red blue Lcd display modules lights as appliances ) . Such very low power light emitting diodes , lamps and because it is not composed of one array can be uniformly distributed in the back of the LCD screen . Good brightness , the backlight more evenly. Such displays can be thinner and more energy to do , LED life span longer than the life of CCFL , hair color stability is not easy to yellow.
Remember the two display screens are used as there is no difference. But just different light backlight
订阅:
博文评论 (Atom)
没有评论:
发表评论