LCD splicing screen routine maintenance of dirt cleaning tips

LCD splicing screen is no longer a luxury few decades ago , along with the popularization of intelligent LCD splicing screen applications are increasingly being used as the LCD splicing technology LCD splicing screen life has also been extended , ordinary LCD splicing screen backlight life of 10,000 to 30,000 hours , while the LCD splicing screen backlight life can reach 5-10 million hours or more , of course, with our daily maintenance is closely Contact our routine maintenance not only the life of the LCD splicing but also has a significant impact on the relationship between LCD splicing screen display effect when used , so the LCD splicing screen for routine maintenance is necessary .
Maintenance of the LCD splicing screen , we have involved in the clean-up of dust , a seemingly simple operation actually there are a lot of tips on cleaning up the dust when the surface of the screen .lcd module First, we can at the screen with mouth blowing gently , gently blow off the dust on the screen . For that part did not blow off the dust , use a dedicated LCD cleaning cloth stitching on the LCD screen gently wipe , wipe when the attention of the force should be small , do not use the screen to rub vigorously . Clean fingerprints on the screen . Clean fingerprints on the screen need to use special screen cleaner and a dedicated LCD cleaning cloth , first we dedicated LCD splicing screen cleaner pour a little to a dedicated LCD cleaning cloth , and then use the dedicated LCD cleaning cloth fingerprint area gently wipe , wipe clean with a dry soft towel to gently wipe the screen clean.
Clean up the oil on the screen . For the need to use alcohol, with a dedicated LCD cleaning cloth stained with a little alcohol , and then gently with oil in the area gently wipe , wipe clean with a dry towel immediately after the wipe clean the screen . Can not dip too much alcohol , alcohol will have a corrosive effect screen , wipe with a towel immediately after going to wipe the screen .
Here we must be reminded that when the Character LCD Modules splicing wall profiles found dirt , put another way to use the correct dirt quit . Use the best media is soft, non-fibrous material , such as cotton , lens tissue or soft cloth , etc., and then stick a small amount of glass cleaner wipe it quietly agent to stop the use of alcohol a class of chemical solution , nor can the rough the cloth or paper goods , since such materials prone to scratches. Here to remind you that , do not spray directly into a clean economy presents on the screen , it is easy to flow inside the screen so that the external LCD screens showing short obstructed, resulting in unnecessary losses.