2013年9月27日星期五

Touch screen use and maintenance points

Due to technical limitations and equipment in different environments, as water droplets on the screen, dust and other contamination does not work properly, so the touch screen is also the same as with ordinary machines require regular maintenance. And because the touch screen is a variety of electrical equipment highly integrated touch one machine, so the use and maintenance should pay attention to some of the following questions:
A) before turning on the screen with a soft dry cloth;
2) water or beverage falls screen causes the software to stop the reaction, which is due to water droplets and the finger having similar characteristics, need to wipe the water droplets;
3) Touch screen controller can automatically determine the dust, but too much dust will reduce the sensitivity of the touch screen, Graphic LCD Display just use a dry cloth to wipe clean the screen;
4) application of glass cleaner dirty fingerprints on the touch screen and oil;
5) strict accordance with procedures and off the power, turn off the power in the reverse order;
6) generate a large number of temporary files on your hard drive, or if you frequently break off without exiting Windows directly, will soon lead to hard disk for errors. Therefore, the need to periodically run Scandisk scan the hard disk error, the application can set the password for the best way to exit the application and Windows re-power;
7) pure touch screen program does not require the mouse cursor, the cursor will only make the user can not concentrate;
8) should choose the most adequate application uses a simple anti-mouse mode, because of the complex model requires sacrifice latency and system resources;
9), as the deteriorating environmental conditions, periodically clean the touch screen to open the nose and the inner surface of the reflective stripes. Specific method is: Open the cover on both sides of the machine, you can find the front nose withhold release latch organs, open the body to release the latch. Lift the front of the nose, you can see the touch screen control card, unplug the touch screen cable, removable head to head back and touch screen. Look carefully at fixed touch screen method, remove the touch screen cleaning, be careful not to use cardboard or hard cloth, Character LCD Modules do not scratch the reflective stripes. Finally, in reverse order and the original structure will head recovery;
10) belong to man-machine interface touch-screen machine control engineering Copyright, fever than larger, it is necessary to take on the touch screen to cool the body and the surrounding environment measures.

没有评论:

发表评论